Beschreibung
Wichtige Merkmale & Vorteile
Compact Rack-Mounted Design
Space-saving precision cooling units designed for integration into IT racks, server cabinets and compact edge infrastructure.
Flexible Cooling Capacity
Four split and integrated configurations with nominal cooling capacities of 3.5, 7.5 and 12.5 kW.
Energy-Efficient Inverter Technology
DC inverter compressor, EC fan and electronic expansion valve provide variable-capacity operation according to the cooling demand.
Close-Coupled Precision Cooling
Delivers cooling directly inside or near the equipment rack, helping reduce unnecessary room-level airflow and improve thermal management.
Intelligent Monitoring & Control
Standard RS485 communication interface supports remote monitoring and control in distributed and unattended IT environments.
Easy Installation & Maintenance
Pull-out rack-mounted construction simplifies installation and servicing, with automatic restart after mains power restoration.
Typische Anwendungen
Edge Data Centers
Localized precision cooling for compact edge computing and distributed IT infrastructure.
Single Server Cabinets
Dedicated thermal management for individual server racks and equipment cabinets.
Telecommunications
Precision temperature control for network equipment, communication racks and telecom installations.
Micro Data Centers
Rack-integrated cooling for modular micro data center and self-contained IT infrastructure solutions.
Industrial IT Infrastructure
Cooling for critical IT and control equipment installed in space-constrained industrial environments.
Remote & Unattended Sites
Remote monitoring and automatic restart capabilities for distributed equipment locations.
Models & Configurations
Deckro RackCool Series is available in split-type and integrated configurations for different rack cooling requirements, equipment loads and installation environments.
| Model | Configuration | Cooling Capacity | Rack Height | Air Volume |
|---|---|---|---|---|
| DRC-035-S | Split Type | 3.5 kW | 4U | 700 m³/h |
| DRC-075-S | Split Type | 7.5 kW | 8U | 1,500 m³/h |
| DRC-125-S | Split Type | 12.5 kW | 10U | 2,300 m³/h |
| DRC-035-I | Integrated | 3.5 kW | 8U | 700 m³/h |
4
Available model configurations
12.5 kW
Maximum nominal cooling capacity
10U
Maximum indoor unit rack height
Cooling Technology & Performance
- Nominal cooling capacity: 3.5 / 7.5 / 12.5 kW
- Close-coupled rack-mounted precision cooling
- DC inverter compressor technology
- Electronic expansion valve
- High-efficiency EC fan
- V-shaped evaporator construction
- Refrigerant: R410A
- Specified sensible heat ratio: 100%
Indoor Unit & Physical Specifications
- DRC-035-S: 483 × 750 × 175 mm; 22 kg
- DRC-075-S: 483 × 750 × 353 mm; 38 kg
- DRC-125-S: 483 × 800 × 442 mm; 47 kg
- DRC-035-I: 440 × 900 × 355 mm; 45 kg
- Airflow: 700 / 1,500 / 2,300 m³/h
- Rack-mounted pull-out design
- Split and integrated configurations
Power Supply, Heating & Humidification
- Power supply: 220 V AC, single-phase, 50 Hz
- Maximum operating current: 13.5 / 26.8 / 30.5 A
- PTC heating: 1.2 / 2.4 / 3.0 kW
- Optional humidification for split models
- Humidification capacity: 0.6 / 1.2 / 1.5 kg/h
- Integrated 3.5 kW model: humidification not specified
- Automatic restart after power restoration
Outdoor Units & Installation
- DRC-035-S outdoor unit: 898 × 340 × 606 mm; 35 kg
- DRC-075-S outdoor unit: 935 × 396 × 800 mm; 45 kg
- DRC-125-S outdoor unit: 988 × 440 × 1257 mm; 65 kg
- Outdoor unit full-load current: 7.2 / 14.8 / 18.0 A
- Outdoor unit power: 220 V AC, single-phase, 50 Hz
- Specified outdoor operating range: -15°C to +45°C*
- Integrated model: no separate outdoor unit
Cooling & Airflow Management
Close-Coupled Cooling
Rack-level cooling arrangement delivers conditioned air close to the equipment heat source, reducing dependence on room-level airflow distribution.
Variable-Capacity Operation
DC inverter compressor, EC fan and electronic expansion valve continuously adjust system operation to the actual cooling requirement.
Remote Monitoring & Control
Standard RS485 communication interface enables remote supervision and control for distributed racks and unattended IT installations.
Standards & Certifications
Product Documentation: Technical specifications and configuration details are available upon request.
Electrical & Safety Compliance: Applicable conformity documents and certification status to be confirmed for the selected model and destination market.
Factory Testing: Inspection and test documentation subject to the agreed project scope.
Installation Requirements: Final selection must consider rack heat load, power supply, unit dimensions, outdoor-unit installation and environmental conditions.
Electrical & Safety Compliance: Applicable conformity documents and certification status to be confirmed for the selected model and destination market.
Factory Testing: Inspection and test documentation subject to the agreed project scope.
Installation Requirements: Final selection must consider rack heat load, power supply, unit dimensions, outdoor-unit installation and environmental conditions.
Produktcodes
| Stock Code | Product Description | Capacity | Configuration | Rack Height |
|---|---|---|---|---|
| DRC-035-S | RackCool 3.5 kW Rack-Mounted Precision Cooling | 3.5 kW | Split Type | 4U |
| DRC-075-S | RackCool 7.5 kW Rack-Mounted Precision Cooling | 7.5 kW | Split Type | 8U |
| DRC-125-S | RackCool 12.5 kW Rack-Mounted Precision Cooling | 12.5 kW | Split Type | 10U |
| DRC-035-I | RackCool 3.5 kW Integrated Precision Cooling | 3.5 kW | Integrated | 8U |
*Outdoor operating temperature range and final model-specific performance conditions are subject to technical confirmation.
Need precision cooling for your server racks or edge data center?
Tell us your rack heat load, available rack space and installation requirements. We’ll help you select the right Deckro RackCool configuration.
